Mini Champ body only, no gas tank
I know this is a lot of money for an old mini but material costs dictate this price. However you will definitely be the coolest thing on the track
$325
Mini Champ body with gas tank
If you wish a body with a built-in tank please know this is an expensive option because I have the tanks protected with an anti-ethanol coating so you can use just any old gas with out worrying about the tank melting away and paint bubbling. Includes plated filler neck, gas cap with check valve and a petcock.
POR
|
Vintage Mini Race Body -
The Mini Champ
I designed this body after the famous Doug Schwerma Champion framed flat track motorcycles in the 70s and 80s. It has more of a motorcycle style and really makes a mini look good. My glass tends to be on the thick side which is good-it's stronger and can take abuse but it needs adult care. If you are going to let the kids ride the mini-get a Wedge instead (there's less sticking out to break.) The mini Champ fits narrow Azusa and Manco frames but you'll have to narrow an Acme frame to fit this body.
Contents:
 Body
Seat cushion
Velcro for cushion-to-body mounting
Four 1/4" button bolts and Lock nuts
Mini Champ-
Copyright © 2008, Phil Little Racing.com, all rights reserved.
|
Mini Frame package
The web introduction of my Mini Champ and Wedge mini bodies has sparked interest and exposed the fact that folks don't necessarily know where to go to get all the rest of the stuff to make a running mini. To that end I want to offer you a package with every little part to make a complete bike. This is a bolt together package. The only labor is welding on the kick stand, cutting chain to length and paint (because the frame and forks comes in raw metal.) This should be a fun project especially if you have an interested young boy or girl. (If you are a low patience type - you may want to read Robert M. Pirsig's Zen and the Art of Motorcycle.)
|
Frame-New style Azusa frame with forward handle bar forks and stem bolt/nut. (If this is to be an adult only mini-think about heating and widening the bars-see the bars on my small wheel Mini Wedge.)
- Frame/fork/stem
- Kick stand
- Foot peg pkg
Wheels and axles - I am a big believer in big 10" wheels because that's the suspension system for rigid frame minis. Instead of threaded at both-end-rods for axles, I am including 5/8"-18 bolts with nyloc nuts!
- 10" front chrome wheel with bearings
- 10" rear chrome wheel with bearings and 72T sprocket
- 5/8-18 x 7 front axle w/nyloc nut
- 5/8-18 x 10 rear axle w/nyloc nut
- (2) 1 1/8" front axle spacers
- 1 7/8 rear axle spacer, right side
- 1 1/8" rear axle spacer, left side
Chain
|
Brake (rear only)
- Drum brake assy
- Brake lever
- Brake cable
- Brake cable swivel clamp
Throttle
- Twist throttle w/ cable
- Left grip
- Cable stop for carb
- On/Off kill switch
Price for frame kit is $549
Body/seat
Pick either my Mini Champ ($325)
or Wedge Body ($295)
10" Tires and tubes
Two race style mini tires and tubes are ($118 pair)
Power package - I recommend a bolt-on Comet Torq-A-Verter clutch with the engine of your choice
Thanks,
Phil Little - litadv@aol.com
|
|
Click to view larger
Mini Champ body
